/ 1
Equipment
Instrument unit

The complete set of the air balloon includes an instrument unit. Operation, storage and maintenance of the unit must be performed in accordance with the operational manual for the unit. The owner (Operator) must use the instrument unit, comprising an altimeter and a variometer.
The weight of the device is 89g, and the size (dimensions) is 126×73×12 mm.
The device's built-in memory allows you to record and store up to 100 hours of flight time.
The monochrome display with high contrast is clearly visible even in direct sunlight. It is covered with plexiglass polycarbonate glass, which ensures long service life and scratch resistance. The polycarbonate screen in combination with the rubberized back cover makes the Vario LS Flymaster extremely durable. A hybrid display consisting of segments and graphic zones allows you to change the fields in the graphic zone. The display shows the clock even when it is turned off.
The device has a piezo speaker that provides a volume of up to 90 dB. The sound modulation of the Vario LS can be adjusted to the personal preferences of each pilot.
A thin and sensitive variometer sensor tested in other Flymaster devices.
The built-in Li-Ion battery is designed for 100 hours of operation. The Flymaster Vario LS is charged by any USB 5V charging.
Intuitive and simple instrument menu.
Large buttons allow you to operate the device even with gloves in flight.
Drop line

The drop line is intended for mooring the air balloon after landing (if required), and in abnormal procedures
First aid kit

In the air balloon the same kind of first aid kit is used as in a car
Fire extinguisher

Powder-type fire extinguisher with a mass of extinguishing agent of 2 kg is installed
Manifold

A is a T-connector with two pipes and a pipe connector at the end (similar to the connector of the cylinder). The manifold is intended for connection of two cylinders to one burner of the burner unit
Release mechanism

Release mechanism is intended for prevention of premature take-off of the air balloon and release of the balloon before take-off

.
Release mechanism type F

The fabric release mechanism is designed to prevent the balloon from taking off prematurely and the balloon from detaching before takeoff. It is used with shells with a volume of up to 3000 m3
Pilot restraint harness

The pilot restraint harness provides restraint for the pilot during the air balloon landing. The harness can be adjusted to any size of the pilot. The harness provides free movement of the pilot in the basket. In the EU the use of the pilot restraint harness is obligatory for partitioned baskets
Burner support rod covers are intended for covering support rods, basket wires and hoses of the burner unit
Attaching strap for cylinders

Each cylinder requires two straps
Other parts used in flight

The following parts, included into the air balloon set, are used: 

  • burner support rods for installation of the burner unit on the basket;
  • pilot’s bags and other parts

Moscow +7 495 540 4343, fax +7 495 617 0128 office@rusbal.ru 
    
Contact information
Информация на данном сайте носит ознакомительный характер, и не является офертой. Характеристики изделий являются ориентировочными и устанавливаются эксплуатационной документацией и договором.